viper 5902 wiring 01 civic

I get 7 light pulses after trying remote start. Can anyone simplify how to set this up for automatic trans control center programing? I Aldo need to set the flex relay for accessory 2?Posted from my iphone 4

I think I have it on auto trans and flex relay set to accessory 2. Still same thing, fob says remote start not available, lights flash 7 times indicating timer mode/turbo mode/manual mode error. What am I doing wrong, I'm at my wits end, this has been 4 fun filled days lol!  So I open the door, turn key on then off, press control button till I hear 3 chirps for menu 3, then press once for menu 3 option 1, then I hold it and press unlock for auto trans opt.2, release, the blue light flashes 2 times indicating opt.2 is selected. and then alarm chirps and goes off for a second I hit unlock and close the door and test, remote start not available, 7 flashes.Posted from my iphone 4

Just for grins, try going through it again only this time press the LOCK button.  The install instructions state:

Pressing the button that arms the system selects the options in increasing order.... Just a thought.

When all else fails, Read the Instructions

Support the12volt.com Make a Donation

Cool I finally got it to attempt a remote start, it tries 3 times and reports a code: tach voltage to low. Looks like a tach wire is required, virtual tach or not. I'll hook that up tomorrow. A Huge Thank You to all of you that tried to help me. I'm almost happy. Window module next week lol! I'll be back!Posted from my iphone 4

Ok so now I hooked up the tach wire, when I hit remote start the car just keeps turning over until I stop it. Could it be the flex relay setting? I put it on accessory 2 is there anything else you can think of or do I have a wire crossed? On the h2 harness all I have hooked up is the tach. The neutral safety is grounded. Help!!!Posted from my iphone 4

By the way I don't get any errors back on the led or the lights or the remote! Just turns over won't start!Posted from my iphone 4

Again, didn't I mention by-passes?

Howie, I'm not sure what you mean by bypass, are you trying to help me or diss me?Posted from my iphone 4

Two things. 

 1. )   Did you do a Tach Learn?  This is necessary before trying a remote start in Tach mode.

 2.)   Try a remote start with a working key in the ignition switch but left in the OFF position.  This will determine if your transponder bypass module is working.  You did not mention it so far, but one is probably required for your car.  If you didn't install a transponder bypass module and the car starts with the key inserted, then you need a bypass module as Howard has pointed out.  If you did install one and the car starts with the key inserted, then it didn't program properly.  Here is a link to DEI listings for your car  : http://www.xpresskit.com/VehicleCompatibility.aspx?p=-1&year=2001&make=Honda&model=Civic&ps=1&s=0

Soldering is fun!

I havnt installed a bypass, I didn't think I needed one since the car has zero security, thank you for taking the time to help me out, I'll look into the bypass. Sorry Howie I'm doing the best I can!Posted from my iphone 4