the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

type r central door lock system


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: October 12, 2011 at 8:13 AM / IP Logged  
You can test the relay. When you actuate the lock side the green wire should go to 12v+ for about 0.8 seconds.
When you actuate the unlock, the blue should do the same.
Both sit on ground or 0v (NOT hull!) at rest.
Battery probably co-incidental. If the relay were constantly powering up it would train the battery (say 7.5 amps per motor and 63AH) in about 1.5 hours with 4 power locks, 3 with 2 power locks but as I said you're more likely to burn out the motors.
Mechanically the trick is to mount the actuators so the locks move smoothly with no sticking.
rahsengan 
Member - Posts: 10
Member spacespace
Joined: July 09, 2011
Posted: October 12, 2011 at 11:10 PM / IP Logged  
ahh alright, i see. i guess it was coincidental since i had the locks plugged in for about 2-3 days before the battery died. also the sticking seems like it could have been the problem since the back door actuators were hard to mount so they might be sticking. i will check everything out, thanks so much for all the help guys!
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer