5103 on ’01 navigator?

try programming the PKALL with the fortin manual. maybe that will work out for you. If you try the "Manual mode" make sure you actually hit and release the programming button once.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

tedmond wrote: the lock and unlock wires are at the keyless entry module. its mounted right towards the firewall, and its the connector to the right if your head is underneath the dash looking at the firewall.

I must be bumping into a colorblindness issue here, I hooked onto what I though were the thin Pink/light green and Pink / YELLOW wires that my diagram shows should be the lock and unlock wires, but I can only lock....no unlock....Xtant 3300X

BA Pro Series

JL 10" Thumpers

tedmond wrote: because the key comes from the dealer, it doesn't indicate it was an original key. they prob had some lock smith come and clone the key. the keys are manufactured by strattec, but there is OEM and the STRATTEC branded keys. If your key has a lincoln symbol then its OEM. If it says strattec, the only way to program those are "cloning" with OEM a scantool is required.

Son of a vondruke!!! I have a locksmith that offered me the key for $45 and I turned him down because I knew I needed the genuine product.......stupid stealership! Guess I am going back there next week, I paid $90 for an additional master, not a stupid clone! thanks for clearing up the air on this one...man this install is like roadblock after roadblock.Xtant 3300X

BA Pro Series

JL 10" Thumpers

no problem, it can be tricky. the easiest route is sell your PKALL and use a key-override-all. Single master key needed and it programs.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

dubl0vert wrote: I must be bumping into a colorblindness issue here, I hooked onto what I though were the thin Pink/light green and Pink / YELLOW wires that my diagram shows should be the lock and unlock wires, but I can only lock....no unlock....

What did the wires you tagged test as? Did they show ground when locking/unlocking?Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205