viper 5704 remote start

I have a 2006 silverado and the viper 5704 with xpresskit Db-All. The alarm work and remote start works but the remote start is throwing transmission codes. I have the wires hooked up like this. Now Chevys has 2 12v constants so I split the 12v constants from remote start like I'm bout to write down From truck to r/s 12v red----- red, RED / white 12v 12v red----- RED / black 12v Starter yellow------ violet(car side) and green(key side) Ignition 1 pink------- pink ignition 1 **Note 1**Ignition 2 white------ ignition 2 Pink/white**Note 1** Acc 1 orange------- acc1 orange **Note 1** this wire I don't know if I have it right. It's suppose to have power going to it and don't know if I'm suppose to have a jumper wire for power or if the r/s supplies the power. I have tested it before and it had power but still throwing codes. Any help appreciated

There's a brown 2nd ACC that's the root of your problems. Ign 1 Ign 2 Starter ACC 1 ACC 2 Power up the RED, RED / WHITE and RED / BLACK Use the satellite relay orange to feed a relay,see diagram:- gmc_ign_acc_start.bmp Lastly NEVER JUMP it will cost you $$$! Always relay. Vehicle manufacturers have multiple wires for a reason!

Hey I asked a similar question and on page 2 of this link they answered it hope it helps you https://www.the12volt.com/installbay/forum_posts.asp~TID~130514~PN~1~TPN~2

Don't worry guys, it's a recurring question, I actually made up that diagram as a template!

So everything I have is hooked up right. Why does the brown acc nee to be connected

Err you answered that in the first line of the original post. THROWING CODES doh.

20silverado06 wrote: So everything I have is hooked up right. Why does the brown acc nee to be connected

because if you dont hook it up then it throws a code... it feeds some module somewhere in the truck that tells the truck to do something and if it doesnt do that then it thinks there is something wrong. i think it also powers the AC or the radio circuit.

Yea sorry for all the questions. I've installed alarms before and they are simple. But the remote start is getting to me

Agreed, no real rules but a few clichés test and verify everything. Breathe slowly and take it easy, problem, post it here or have a cup of tea or coffee well away from the vehicle, don't laugh it works for me.

So what about the BLACK/ pink wire that's not being used. It has a relay to it inside the viper