viper 350 plus silverado

i got both but the xk01 didnt wanna work i went n got it flashed n programed for the truck but no luck so i ordered the 1700g i just hadnt had time to install it

The XK01 should work fine for that. Was it flashed with the AMDL v6.00 firmware? Did you try going W2W? That bypass should be a walk in the park on that truck.Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

yea it has the latest firmware n yea the viper only does w2w i think i programed the wrong veichle type on it i was trying to figure out how to reset it so i cant chose a different veichle type

I don't see anything about how to reset it, but have you tried just setting it as you did the first time? It may allow you to change the vehicle type without resetting. When you plug the harness in, then turn the ignition on, the LED will most likely flash 4 times (indicating the vehicle is already set). Try pressing and releasing the programming button to see if it changes. If so, once on type 4, save the programming by holding the programming button until the LED turns on solid then start the truck. Give that a shot and see if it works. Hopefully it does.Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

ok ill gove that a try

ok ill gove that a try

it just blinks like normal

So it won't let you re-program it? I would try contacting Xpresskit to see if they can possibly help you reset it. They may give you trouble though because you are not an authorized installer... some companies will only offer tech support to authorized dealers / installers. If that doesn't work you may just have to use the 1700G instead (or have the XK01 reflashed)Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

it was flashed n ready to go by a autorized dealer he told me jus to wire it up to the alarm n itd start working but i had no luck

You may have to re-flash it in order for it to allow you to reset the vehicle type. I don't work a lot with Xpresskit bypasses so maybe someone has another solution, but I can't find any way to reset it to allow you to set the correct vehicle type.Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205