Viper 5906v on a 2000 Cadillac Deville

Home / the12volt's Install Bay / Car Security and Convenience / Viper 5906v on a 2000 Cadillac Deville

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

ttimms20

Member - Posts: 43

Joined: December 07, 2015

Location: Texas, United States

Posted: January 18, 2016 at 3:55 PM / IP Logged

Yes they are all hot except the Accessory wires, and I sanded past the paint and grounded

We Ride

ttimms20

Member - Posts: 43

Joined: December 07, 2015

Location: Texas, United States

Posted: January 18, 2016 at 3:56 PM / IP Logged

I'm using the 998t to program the alarm if that helps

We Ride

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 18, 2016 at 9:45 PM / IP Logged

That is odd. I honestly don't know why it wouldn't put out anything on your ign wire. I'm not familiar with a bit writer so I can't comment on that.

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 18, 2016 at 9:47 PM / IP Logged

Did it stop working after you changed a setting in the bitwriter or did it just stop working by itself?

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 18, 2016 at 9:56 PM / IP Logged

Are you still getting a ground signal from your orange acc wire on the 24 pin plug where you have your pin 85 on your relay connected to?

If so, (it would be more wiring) but you could take that acc relay, and use it to drive 2 other relays to power your two acc wires.

You don't want to hook up two relays to 1 200ma wire.

ttimms20

Member - Posts: 43

Joined: December 07, 2015

Location: Texas, United States

Posted: January 18, 2016 at 10:15 PM / IP Logged

How would I wire that up and I connected the blue/white directly to the white defrost wire and I'm still getting a feature not available on the screen

We Ride

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 18, 2016 at 10:31 PM / IP Logged

If using the 2nd status as the Defog output, it turns on by itself below a certain temp. I can't remember what temp it is though.

Make sure your 2nd acc relay is stil functioning before worrying about doing more relays. I assume it is, but just making sure.

ttimms20

Member - Posts: 43

Joined: December 07, 2015

Location: Texas, United States

Posted: January 18, 2016 at 11:05 PM / IP Logged

How would I test that

We Ride

mscguy

Copper - Posts: 212

Joined: November 28, 2015

Location: British Columbia, Canada

Posted: January 18, 2016 at 11:10 PM / IP Logged

Measure pin 30 of your acc relay you wired. If you're getting 12 volts during remote start, it works.

I wonder if your unit is damaged somehow causing nothing to be output from your orange acc wire.

ttimms20

Member - Posts: 43

Joined: December 07, 2015

Location: Texas, United States

Posted: January 18, 2016 at 11:21 PM / IP Logged

No power there either. Here is a picture of what appears to be a resistor on the relay harness Viper 5906v on a 2000 Cadillac Deville - Page 4 -- posted image.

Viper 5906v on a 2000 Cadillac Deville - Page 4 -- posted image.

We Ride

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.