2014 Nissan Juke PTS

Home / the12volt's Install Bay / Car Security and Convenience / 2014 Nissan Juke PTS

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: January 16, 2016 at 9:37 PM / IP Logged

Having a problem programming the ALCA on this car, took out battery from keyfob but then the ignition does not turn with the battery removed from from keyfob and held to the start button . Any one ever did one if these cars ? Any help would be appreciated

triniforever

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: January 16, 2016 at 11:21 PM / IP Logged

Take the remote apart, hold the top of the board against the button

Back to Top

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: January 16, 2016 at 11:31 PM / IP Logged

Thats exactly what im doing but as soon as i take the battery out from the remote and hold the board against the push start button absolutely nothing happens when i push the button and the key light starts flashing

triniforever

Back to Top

beegbie

Copper - Posts: 341

Joined: August 17, 2002

Location: United States

Posted: January 17, 2016 at 7:12 AM / IP Logged

We've seen the chip come not programmed from Nissan. Very rare but possible. Did you try your other key?

Back to Top

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: January 17, 2016 at 8:41 AM / IP Logged

I didnt think to try the other key but now that you mention it i will definitely give it a try ...thanks guys .

triniforever

Back to Top

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: January 19, 2016 at 1:29 PM / IP Logged

The problem was when i was putting back the PTS button somehow the transponder receiver plug came loose so it wasnt reading the transponder fixed it and all is well ALCA progeammed right up. Thanks for all your help!

triniforever

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.