2013 Toyota Prius 2 With Viper 3106V

Home / the12volt's Install Bay / Car Security and Convenience / 2013 Toyota Prius 2 With Viper 3106V

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

amazingfacts

Member - Posts: 10

Joined: August 15, 2021

Location: California, United States

Posted: August 25, 2021 at 3:43 PM / IP Logged

Question guys: What would happen if I didn't use the 1N4001 diodes for the door triggers?

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: August 25, 2021 at 6:38 PM / IP Logged

Assuming the instrument panel has a display for individual door open, not using a diode will cause "crosstalk" between doors. if you dont want to use the diodes, go to the domelight and use that feed.

Back to Top

amazingfacts

Member - Posts: 10

Joined: August 15, 2021

Location: California, United States

Posted: August 25, 2021 at 6:54 PM / IP Logged

Ok got it thanks. I'll go for the domelight feed. Now do I need a diode for the domelight feed? Also I noticed on the Viper manual, the domelight (supervision) is an output, not an input. Will the alarm go off if door is opened and domelight goes on?

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: September 13, 2021 at 8:15 PM / IP Logged

No diode is needed for the domelight feed. Use the green negative door trigger input of the alarm and connect it to the door trigger wire at the domelight. No need to use the black/white dome light output, that car already has domelight supervision.

Back to Top

amazingfacts

Member - Posts: 10

Joined: August 15, 2021

Location: California, United States

Posted: September 13, 2021 at 10:00 PM / IP Logged

Perfect thanks T&T. Is it possible to find the domelight wire down at the driver's side kickpanel? My car is a 2013 Prius. Thanks again!

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: September 15, 2021 at 6:33 PM / IP Logged

Unsure as I've never worked on a Prius personally. With Toyota though it will be at either of the A pillars. Go to the Passenger side first.

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.