89 cressida alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 89 cressida alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

michaeltam2k

Member - Posts: 30

Joined: September 02, 2003

Location: United States

Posted: April 19, 2004 at 9:39 PM / IP Logged

Please help me which wire is the tach wire for my 89 toyota cressida ? i know is at the test connector but where is it ? and my car comes with anti theft system and which wire and where is the disarm defeat ? thank you so much for your help .

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 19, 2004 at 9:44 PM / IP Logged

Remote Start

Tach Signal BLACK / YELLOW AT IGNITER OR DIAGNOSTIC PLUG

Ignition #2 BLACK / YELLOW IGNITION SWITCH HARNESS

Ignition #3 N/A

Accessory

Neutral Safety NOT GROUNDING TYPE - OEM SWITCH OPENS STARTER CIRCUIT

Brake Light

Reverse Light RED / BLACK (+) AT SWITCH

Rear Window Defrost

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

michaeltam2k

Member - Posts: 30

Joined: September 02, 2003

Location: United States

Posted: April 19, 2004 at 9:53 PM / IP Logged

where is the IGNITER OR DIAGNOSTIC PLUG ? and do you know where is the disarm defeat wire ?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 19, 2004 at 10:10 PM / IP Logged

OEM Alarm Disarm BLU/WHT (-) DOOR JAMB HARNESS

look under the hood, you should see a small module the says igniter right on it

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 19, 2004 at 10:23 PM / IP Logged

may want to look for the igniter mounted at the driver's strut tower

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

michaeltam2k

Member - Posts: 30

Joined: September 02, 2003

Location: United States

Posted: April 25, 2004 at 9:13 PM / IP Logged

I istall my Prestige APS-55LRA in my 89 toyota cressida today but everything works but except when i remote start it the parking light flashes but the car won't start .what am i missing there ..please anyone help me ...thanks alot

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: April 25, 2004 at 10:25 PM / IP Logged

You sure you have all you ign wires powered up?

Does it even crank over?

Is it a manual?

Here is the diagram that i have for that car

Toyota

Cressida

1989-1992

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #1:	BLACK/ RED	IGNITION SWITCH HARNESS
Ignition #2:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:
Brake Light:	GREEN / WHITE(+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	BLACK / YELLOW	AT IGNITER OR DIAGNOSTIC PLUG
Parking Lights:	GREEN	(+) AT FUSE BOX
Headlights:
OEM Alarm Disarm:	BLUE/WHITE (-)	THEFT MODULE LEFT OF STEERING COLUMN
OEM Alarm Arm:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:

Toyota

Cressida

1989-1992

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ RED OR WHITE	IGNITION SWITCH HARNESS
Starter Kill:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLACK/ RED	IGNITION SWITCH HARNESS
Dome Lights/Superv:	RED / WHITE	(-) AT FUSE BOX
OEM Horn:	GREEN/ RED (-)	STEERING COLUMN HARNESS
Power Lock:	GREEN	DRIVER'S KICK PANEL *
Power Unlock:	RED / YELLOW OR BLUE	DRIVER'S KICK PANEL *
Trunk Release:
Alarm Input Wire:	RED / WHITE	(-) AT FUSE BOX
Notes:	* See Note #201 - Negative Pulse Door Lock Diagram.

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

michaeltam2k

Member - Posts: 30

Joined: September 02, 2003

Location: United States

Posted: April 25, 2004 at 11:04 PM / IP Logged

now that when had it start but my factory alarm sets off when i remote start my car . do you know how to by pass that factory alarm ..thanks alot

michaeltam2k

Member - Posts: 30

Joined: September 02, 2003

Location: United States

Posted: April 25, 2004 at 11:46 PM / IP Logged

where is the DOOR JAMB HARNESS ? thanks

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

89 cressida alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.