the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

integra trunk setup - first project


Post ReplyPost New Topic
< Prev Topic Next Topic >
justtegit 
Member - Posts: 47
Member spacespace
Joined: February 15, 2004
Posted: February 28, 2005 at 12:41 AM / IP Logged  

Well there it is guys, I finally completed this 4 weekend project.  I estimate about 50 hours of work went into this box.  One page one are the pics showing the steps up until this point.  I decided to go with a factory look instead of the flashy high gloss black on the fiberglass top portion.  There were so many curves and contours that the bondoing was killing me....I kinda just wanted to see what it would look like with the high gloss, I probably would have eventually covered it in vinyl anyway.  The vinyl I went with was the stretchiest most expensive vinyl I could find.  It has a very nice feel to it and is nicer than the material our dash's and doorpanels are made of even.  The bottom is automotive/marine carpet.  I am still going to make wire covers for the sides of the amp, but that didnt prohibit me form putting it in the car as is and taking pics...let me know what you think...IO dont know of anyone else with a 15 fiberglassed into the rear deck of a teg

justtegit 
Member - Posts: 47
Member spacespace
Joined: February 15, 2004
Posted: February 28, 2005 at 12:43 AM / IP Logged  
damnit why do pics on this forum always do that......could a mod help me out and fix those since it wont let me edit my posts yet....sheesh i never have these problems on any other forum
oonikfraleyoo 
Gold - Posts: 1,069
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2005
Location: United States
Posted: February 28, 2005 at 7:58 AM / IP Logged  
Very nice. Good work man.
Nik
Jeeputer Progress
[|||||||||||-] 90%
Check it out.
realitycheck 
Silver - Posts: 751
Silver spacespace
Joined: September 09, 2004
Posted: February 28, 2005 at 8:16 AM / IP Logged  
Yeah cool man, from your first post 4 weeks ago I was extremely confused as too what you were doing.  I see it now though and it looks really nice, excellent job on the vinyl.
Learning the trade one fiberglass creation at a time!
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 28, 2005 at 9:41 AM / IP Logged  

justtegit wrote:
damnit why do pics on this forum always do that......could a mod help me out and fix those since it wont let me edit my posts yet....sheesh i never have these problems on any other forum

Done, the pics get distorted for some odd reason??

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
justtegit 
Member - Posts: 47
Member spacespace
Joined: February 15, 2004
Posted: February 28, 2005 at 4:44 PM / IP Logged  

integra trunk setup - first project - Page 2 -- posted image.integra trunk setup - first project - Page 2 -- posted image.integra trunk setup - first project - Page 2 -- posted image.integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

integra trunk setup - first project - Page 2 -- posted image.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 28, 2005 at 6:49 PM / IP Logged  
When you take your pics, try to use a smaller resolution or size it down in Photoshop . Not trying to pick on anyone here but your killing the bandwidth here with these huge sized pics.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
justtegit 
Member - Posts: 47
Member spacespace
Joined: February 15, 2004
Posted: February 28, 2005 at 9:09 PM / IP Logged  
sorry im not used to having to do that most forums autoresize...will do
1hot944 
Copper - Posts: 46
Copper spacespace
Joined: November 06, 2004
Location: Canada
Posted: February 28, 2005 at 9:16 PM / IP Logged  
Looks good! Nice job integra trunk setup - first project - Page 2 -- posted image.
In a world full of copycats, it's great to be an original!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer