Door popping circuit

i use the age old technique of paintbrush! Its great for simple diagrams coz it has sqaure, line and simple tools like that. Its a bitmap editor so everything is really easy to change, no pissing about with layers like in photoshop.Hello!!!

you may have decided how to overcome your problem but if you use an aftermarket 5 wire actuator to unlock the door then you have a microswitch that is built into the actuator! 5 wire motors more often than not have a green, blue, brown, white, red or black wire, the green and blue wires are the drive wires the black or red is the input wire leaving the brown and white as the output wires, these are needed to send a negative pulse back to the locking module so it inturn opens the rest of the doors, if you connect the black or red wire to ground then you will get a neg output on the brown when lock and a neg output on the white when unlocked or the otherway around i can never remember i think that this will be the easiest way to get around your problem let me know how you go good luckI Love This Industry!!

xtreme069, that's very good thinking. I hadn't even thought of that idea. That does sound like a solution that you should use paulieA.Steve G

yeah never though of that....   something could deffinately be done that way...

sorry it's taken me so long to get back to you, whats your email address i'll send you a diagramI Love This Industry!!

post how you get on with the job