the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

passlock light with 555l


Post ReplyPost New Topic
< Prev Topic Next Topic >
isus 
Copper - Posts: 71
Copper spacespace
Joined: October 19, 2004
Location: United States
Posted: January 12, 2006 at 10:10 AM / IP Logged  
I installed a remote start in a 2003 impala and used a dei 555l for the bypass.  No for some reason the passlock light comes on in the message center only when the car is not running but the key is in the on "acc" position.  Do I need to diode isolate one of the wires off of the bypass?
isus 
Copper - Posts: 71
Copper spacespace
Joined: October 19, 2004
Location: United States
Posted: January 12, 2006 at 11:20 AM / IP Logged  
I'm stupid, I admit it.  The car is supposed to do that.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer