the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Modding Avic-N1/N2 Nav DVDís


Post ReplyPost New Topic
< Prev Topic Next Topic >
sush1a 
Member - Posts: 17
Member spacespace
Joined: August†01, 2004
Location: United States
Posted: February†04, 2006 at 4:38 AM / IP Logged  
I've also played with subbing files on the dvd.. and got it updating only one firmware instead of 2.. but busy these few days.. will have to mess with it more later on..
Ballerinstaller 
Copper - Posts: 58
Copper spacespace
Joined: May†18, 2005
Location: United States
Posted: February†04, 2006 at 1:27 PM / IP Logged  
Glad to hear the good news! Now if I only had a copy of the N-2 software......
Pioneer Avic-N1
Clarion 300 watt 4 channel amp
PPI PC21400 1400 watt amp
2x JL 12 inch w7's
Polk EX series in factory locations
2000 Impala LS
Baller Installer - Pete D.
free_refil 
Copper - Posts: 72
Copper spacespace
Joined: November†10, 2005
Location: United States
Posted: February†05, 2006 at 1:05 PM / IP Logged  
If someone here would like to PTP me the ISO's for the latest N2 software disk's I have a 2 meg upload speed on my cable line and wouldn't mind creating a Torrent for the files and seeding them indefinately...
Pioneer AVIC-F700BT
Polk Audio MM6
Alpine MRD-M605
Alpine MRV-F450
Alpine SWR-1242D
RF 1 Farad Cap
Streetwires ZN Interconnects
KnuKoncepts Power Wire
fearx24 
Copper - Posts: 60
Copper spacespace
Joined: April†22, 2003
Location: United States
Posted: February†08, 2006 at 1:35 AM / IP Logged  
I never registered my avic n1 when I got it about a year ago. Is it too late to now and can I still get the free update DVD's so I can try messing around with this stuff. Im a computer science major and think I could figure somethings out. Also is there any other way to get the Serial number from the avic n1 other than off the bottom of the unit. Is it hidden in a menu somewhere because I dont feel like removing it right now to get that when I register it.
Thanks
Ballerinstaller 
Copper - Posts: 58
Copper spacespace
Joined: May†18, 2005
Location: United States
Posted: February†08, 2006 at 2:52 AM / IP Logged  

ARRRRGGGHHH!  I hate Internet Exploder! It keeps erasing my post whenever it blocks a popup on this page!!!! (adding a smiley or previewing the post)

You can find your Serial Number on your original retail packaging (The BOX) fearx24.

Good luck with software modding.

Pioneer Avic-N1
Clarion 300 watt 4 channel amp
PPI PC21400 1400 watt amp
2x JL 12 inch w7's
Polk EX series in factory locations
2000 Impala LS
Baller Installer - Pete D.
deuce2 
Member - Posts: 2
Member spacespace
Joined: February†08, 2006
Location: Canada
Posted: February†08, 2006 at 10:02 AM / IP Logged  

hey guys, sooooo new to this stuff, didnt even know you can mod these things....first off i got an AVIC-N!

i got a simple question and i am sure someone can help me with this, u guys seem like geniuses!  hahaha...

i am trying to make a dvd of MUSIC VIDEOS that i downloaded from LIMEWIRE, they are just video files...

i burn them to a DVD and when i put it in my avic-n1, it doesnt read the DVD but when i play it at home in my DVD player, it works, and the main screen is basically just a list of the dvd's like files.....

i used NERO EXPRESS to burn the dvd and if i remember correctly i used the "burn files to DVD" and it obviously wasnt accepted on my avic.....so what am i supposed to do?  any help would be greatly appreciated!

fearx24 
Copper - Posts: 60
Copper spacespace
Joined: April†22, 2003
Location: United States
Posted: February†08, 2006 at 12:57 PM / IP Logged  
Your DVD at home might read just video files on a DVD. Did you make sure to burn the DVD like it was a movie with menus and stuff to select the videos you want. It should work because I burn DVD's all the time that play in my avic-n1.
Nick
free_refil 
Copper - Posts: 72
Copper spacespace
Joined: November†10, 2005
Location: United States
Posted: February†10, 2006 at 7:05 PM / IP Logged  
Just called Pioneer and they're sending me the new DVD's for the AVIC-N2. Once I get them home I will make ISO's and post a torrent. Let you guys know when it's up...
Pioneer AVIC-F700BT
Polk Audio MM6
Alpine MRD-M605
Alpine MRV-F450
Alpine SWR-1242D
RF 1 Farad Cap
Streetwires ZN Interconnects
KnuKoncepts Power Wire
wrecklesswun 
Member - Posts: 46
Member spacespace
Joined: January†20, 2006
Posted: February†13, 2006 at 10:27 AM / IP Logged  
ok i replaced all files except what appears to be the os... and it worked, it recognizes the map data...however when you input a new destination, it returns to the map screen.  I read somewhere to disable the dvd vid feature, one file has to be removed from the dvd.
wrecklesswun 
Member - Posts: 46
Member spacespace
Joined: January†20, 2006
Posted: February†13, 2006 at 10:28 AM / IP Logged  
also has anyone verified that the d1 fix doesn't work for the n1, or that the n1 has the same circuitry as the n2 ?
Page of 50

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, June 18, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer