the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 791xv, options, siren


Post ReplyPost New Topic
< Prev Topic Next Topic >
ainami 
Member - Posts: 28
Member spacespace
Joined: November 17, 2006
Location: United States
Posted: December 14, 2006 at 1:53 PM / IP Logged  

Turn the ignition ON than OFF agian.

Press and hold the valet button until the system chirp once.
Release button.
Press button 3 times.
Than press and hold button until system chirp three times.
Press and hold button again.
While holding it, press lock button on remote for one chirp.
Release valet button.
Wait a few seconds and the system will confirm with a short siren.

That's it.

Remember, door must be open.

jayno20 
Copper - Posts: 76
Copper spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 2:01 PM / IP Logged  
ok i just did that and it did all the chirps and everything, but the doors still dont lock with the ignition being on...
jayno20 
Copper - Posts: 76
Copper spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 2:11 PM / IP Logged  
i noticed it chirps 2 times instead of one regardless if i press the lock or unlock button... so i dont think its taking it..
jayno20 
Copper - Posts: 76
Copper spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 2:19 PM / IP Logged  
ok i got it to work, i was pressing the valet switch too many times.... but now for some reason when i arm the car the car chirps one extra time then the door sensor blinks on the remote and the led blinks 3 times fast..., what happened ith that?
ainami 
Member - Posts: 28
Member spacespace
Joined: November 17, 2006
Location: United States
Posted: December 14, 2006 at 2:29 PM / IP Logged  
Press once again for one chirp.
Two chrips turns it off.
One chirp turns it on.
jayno20 
Copper - Posts: 76
Copper spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 2:38 PM / IP Logged  
ok i got it to work, but my door is being wierd.. sometimes when i close it and activate the alarm it beeps like the door is open still (the indicator light on the dash is NOT on) any idea why that might be happening?
also i noticed in menu 3 in the installation manual there is an option for "activation pulse count" either 1 or 2, if i set that on 2 wouldnt it make the same sound it does when unlocked instead of just a single beep when locked?
jayno20 
Copper - Posts: 76
Copper spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 3:08 PM / IP Logged  
ok nevermind about the pulse count thing i figured it out... any idea whats up with the door thing though?
mobilecustoms 
Silver - Posts: 397
Silver spacespace
Joined: November 04, 2005
Posted: December 14, 2006 at 3:40 PM / IP Logged  
your bypass notification is on- are you hooked to dome light for the door tigger?
jayno20 
Copper - Posts: 76
Copper spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 3:43 PM / IP Logged  
i dont know, how can i tell?
mobilecustoms 
Silver - Posts: 397
Silver spacespace
Joined: November 04, 2005
Posted: December 14, 2006 at 3:52 PM / IP Logged  
ask the installer how the door trigger is hooked up
Page of 4

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer