05 f 150 door trigger 564t

Home / the12volt's Install Bay / Car Security and Convenience / 05 f 150 door trigger 564t (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: March 12, 2007 at 12:28 AM / IP Logged

I just completed tthe install of a 564T in my 05 f150 super cab (rear 1/2 doors with factory keyless entry) and I have a question on two things:

1) I am having a problem locating the door trigger wires. The wiring diagram says they should be BLACK/ yel (L) and BLACK/ pink (R) but when I use a dmm on these, they show ground at all times regardless if the door is open or closed. I am looking at the wires near the driver kick panel. I am currently using the positive trigger from the domelight but I would rather use the door trigger.

2) I wired the locks through a relay to the power lock and power unlock wires and when I disarm the alarm, the domelight will not illuminate like it does when I use the factory keyless entry remote. I'm guessing I need to use the domelight supervision on the 564T, correct?

Thanks,

Gary

rhillman75

Member - Posts: 8

Joined: November 16, 2005

Location: Indiana, United States

Posted: March 12, 2007 at 1:06 AM / IP Logged

FORD, F SERIES LIGHT DUTY, 2005, Door Trigger

The wiring above is for vehicles without keyless entry. Vehicles with keyless entry, the door trigger wires are found at the BCM, green plug. The LF door trigger is BLACK / YELLOW in pin 4. The RF door trigger is BLACK/ pink in pin 5. The LR door trigger is BLACK/ lt. blue in pin 12. The RR door trigger is BLACK/ white in pin 13. Use all wires and diode isolate each.

The BCM (Body Control Module) is on the driver side rear cabin wall. You can also find the wires in the door jamb, to prevent using and testing the wrong wires.

You need to use the BLACK/ blue wire for dome supervision. You will have towire a relay for this feature.

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: March 12, 2007 at 8:22 AM / IP Logged

Can anyone help?

410440

Copper - Posts: 82

Joined: January 10, 2007

Location: Canada

Posted: March 12, 2007 at 10:11 AM / IP Logged

i just did one last week and ran all my doorpins to each indavidual door and diode isolate.

doesnt take that much more time to do.

Matthew Robertson

Senior Installer

Best Buy Deerfoot Meadows

Calgary, AB, Canada

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: March 12, 2007 at 8:32 PM / IP Logged

That's what I am trying to do - should the wires show ground only when open?

Gary

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: March 12, 2007 at 10:10 PM / IP Logged

Yes, the door triggers will show ground only when the door is open.

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: March 12, 2007 at 10:27 PM / IP Logged

I get that, but the wires show ground when the doors are closed also. Any thoughts?

Gary

j12v

Copper - Posts: 58

Joined: January 02, 2007

Location: United States

Posted: March 13, 2007 at 2:38 AM / IP Logged

You probably got the wrong wire?

Does your domelights turn on automatically when you open the door?

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 13, 2007 at 7:59 AM / IP Logged

Did you try going further back in the drivers door opening? What did you use for locks....the dome should trigger when unlocked.

gtchida

Copper - Posts: 89

Joined: August 20, 2003

Location: United States

Posted: March 13, 2007 at 12:15 PM / IP Logged

How far back should I go - I am about mid-way in the door opening. I used the power lock and unlock wires and it won't trigger the domelight - any thoughts?

Gary

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.