no luck with xk04

Home / the12volt's Install Bay / Car Security and Convenience / no luck with xk04 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dea,can

Copper - Posts: 284

Joined: January 12, 2006

Location: Saskatchewan, Canada

Posted: September 15, 2007 at 2:59 PM / IP Logged

hi there no luck with the xk04 with new fireware 3-1 .platform #04/ fireware:pkford

thing will not hold a program anyone have a ideal went thought all my wiring back to the old way with a relay spare key works fine.

dragon

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 15, 2007 at 8:03 PM / IP Logged

What kind of car are you doing I use them all the time with no complaints

dea,can

Copper - Posts: 284

Joined: January 12, 2006

Location: Saskatchewan, Canada

Posted: September 15, 2007 at 8:17 PM / IP Logged

2007 ford escape

dragon

chadwa2003

Copper - Posts: 353

Joined: January 08, 2005

Location: Canada

Posted: September 15, 2007 at 8:41 PM / IP Logged

You should be okay to use the pkford version 2 do you have other xk04 to try or maybe you could reflash if you have an xkloader

dea,can

Copper - Posts: 284

Joined: January 12, 2006

Location: Saskatchewan, Canada

Posted: September 15, 2007 at 8:50 PM / IP Logged

if you put the first key in security light comes on then goes off put second key in within 5 secs security light goes on and off remove second key push start button modulator light comes on everything powers up modulater led light comes on and flashes fast and security light on dash flashes fast and nothing happens. If you leave the key in the ignition starts fine. I have reset it a few times re did it a couple times and still didn't work. I had it flashed at visions still didn't work. Seems like the modulater isn't recieving the signal.

dragon

init

Copper - Posts: 93

Joined: March 13, 2007

Location: Louisiana, United States

Posted: September 15, 2007 at 9:17 PM / IP Logged

How did you connect the wires from the bypass to the wires in the car?

I've also heard that the learn routine for adding keys to the car can sometimes be locked by the dealer. I don't know if that's true or not, you might need to look into it if the problem persists.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: September 15, 2007 at 9:18 PM / IP Logged

won't work on the 06+ escape,explorer, tribute or the fusion.

use a pkf3 if you have one ( no wiring changes) or adstb from idata, or a pkuf2 or pats3+

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

dea,can

Copper - Posts: 284

Joined: January 12, 2006

Location: Saskatchewan, Canada

Posted: September 15, 2007 at 9:38 PM / IP Logged

when you go to bypasskits.com it says that 2001 to 2007 support this bybass ...both pats type 1 and pats type 2 &3

dragon

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: September 15, 2007 at 10:08 PM / IP Logged

dea,can wrote:

when you go to bypasskits.com it says that 2001 to 2007 support this bybass ...both pats type 1 and pats type 2 &3

yeah, it says that, also says 3.0 fixes bugs with fusion, sorry, it doesn't work with the 4 vehicles I listed

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

rtperformance

Member - Posts: 17

Joined: August 13, 2007

Location: United States

Posted: September 15, 2007 at 11:25 PM / IP Logged

Really it dose. I have used this on tons of 07 escapes. I didn't need to flash them or anything. I do know if you are not use to them the instructions are scarry. the only wires you need are

Red 12volt

Black Ground

Brown neg trigger input

Pink RX wire

Green TX wire

also when you look at the plug in the instructions it is backwardes. it is a pic from the front of the plug you may be on the wrong wires.

when programing: key1 in and to on

LED will come on, when LED gose off, Key1 off

Key2 in and to on

LED will come on, When LED gose off, Key2 off

Remote start,

Led will come on (car will not start), All shut down

Attempt 2 second start Ing on then start. You are now programed.

I HAVE DONE THIS ON SEVERAL 07 FORD ESCAPES!!

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.