the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 4runner viper 791


Post ReplyPost New Topic
< Prev Topic Next Topic >
djambush 
Member - Posts: 39
Member spacespace
Joined: October 07, 2002
Location: United States
Posted: October 07, 2007 at 6:56 PM / IP Logged  
Very frustrated here.
My 00 4runner limited is nice but when it comes to installing this Viper791 it sux!!
I have become to understand the doorlock DIODE but before I connect the DOOR-Trigger, I like to test the alarm. Right now the LED is solid as if it is in valet mode. I try to disable valet mode via remote & valet button but the led is still solid with no confirming chirps. The Panic works fine (siren WHALES!).
Do you think there is something wrong with the viper or in order for the alarm to work, there needs to be a trigger installed?
Last but not least I bought a NEW shocksensor and notice it has an additional green wire coming from it. What is that for?
I have been working on this for 2 days.
If someone has SUCCESSFULLY installed this unit or a RS unit for that matter, PLEASE PLEASE give me a hand. Maybe a step by step. I will pay!
Thanks guys/gals!
DJ Ambush
ajacobsjr@gmail.com
captainzab 
Silver - Posts: 606
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 09, 2005
Location: United States
Posted: October 07, 2007 at 10:02 PM / IP Logged  
How to enter/exit valet switch:
Since you dont have door trigger hooked up,
turn ignition on then off then tap the valet switch once.
once you hook up your door trigger you can use the remote by opening the door, pressing LOCK UNLOCK LOCK (or LOCK AUX LOCK) not sure which one, but one of them will work.
about the shock sensor, the looped green end goes to the shock sensor while the free green goes to the brain.
That free green wire is zone 2 on the remote (zone 1 is shock sensor), so you can hook up extra sensors.
whats the problem you are having with diodes. its common for cars to require diodes...
negative flows from bandside to non-bandside
what specifically do you need from the 4runner that you dont have hooked up?
you can also use the search button if you still need help.
djambush 
Member - Posts: 39
Member spacespace
Joined: October 07, 2002
Location: United States
Posted: October 07, 2007 at 11:25 PM / IP Logged  
Hey thanks for the reply.
I have searched and read everything about the RS install for the 4runner.
Thing is I did attempt to exit VALET via ignition and STILL a solid LED and no confirm chirp. I was just testing to make sure I had the MAIN wires connected right.
I have found all the connections and everything but it is just aggrivating me that the chirps and it will not exit valet.
Thanks and if you have anymore ideas please let me know
--DJ Ambush
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: October 08, 2007 at 10:22 AM / IP Logged  

Don't you need to have the door open when you go in/out of valet mode?

If so, without the door pins hooked......how does it know if the door is open?

howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: October 08, 2007 at 1:26 PM / IP Logged  
My in a hurry screw-up is to plug the  white LED plug into the blue valet switch receptacle. You will get a dim illumination with the alarm not responding to the remote. Check this out and if this is the case kick yourself but you've done no damage! Just correct it. By the way on a back to basics note is your antenna plugged in? As Kar Tune Man knows I've been having a bad Lexus week!
djambush 
Member - Posts: 39
Member spacespace
Joined: October 07, 2002
Location: United States
Posted: October 08, 2007 at 4:39 PM / IP Logged  
No I think I have the LED plugged into the right spot. The LED just stays solid. I will connect the DOOR trigger in a min.
Thank you everyone for the help. This is the hardest install I have ever done.
WHEW!!
--djambush
djambush 
Member - Posts: 39
Member spacespace
Joined: October 07, 2002
Location: United States
Posted: October 08, 2007 at 8:04 PM / IP Logged  
door triggers are in.
DIODES went perfect!
Doors lock/unlock but will not exit VALET mode.
SOLID BLUE LED.
THIS IS AGGRIVATING!!
No chirp just PANIC siren!!
djambush 
Member - Posts: 39
Member spacespace
Joined: October 07, 2002
Location: United States
Posted: October 08, 2007 at 10:08 PM / IP Logged  
ok...NOW it is out of VALET mode.
I dont know what I did....but it is out...
i guess it heard me talking about it...
anyways...
the shock sensor is not very sensative.
Tested it and it did not go off that good.
umm...
I had the window down and opened the door and it did not go off...
i have the door trigger connected too so I dont know..
hmmm
djambush 
Member - Posts: 39
Member spacespace
Joined: October 07, 2002
Location: United States
Posted: October 09, 2007 at 9:03 AM / IP Logged  
dang it..
Ok...I cut the ring off of the 556U and now I am lost to which connection i put the RED / BLK & BLACK/ Wire to.
DO I connect them to the Keysense or did I fudge up by cutting the ring off?
Again, thanks to everyone for your assistance. Wire tucking is difficult with that little space we have under our dash.
captainzab 
Silver - Posts: 606
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 09, 2005
Location: United States
Posted: October 09, 2007 at 12:39 PM / IP Logged  
its a good thing you cut that ring off, i hate those ring that comes with the 556U, i prefer a think gauge wire (telephone or whatever you have).
556U isnt tight enough for me, i rather wrap my own wire around the key cylinder.
(dont even use DEI bypasses, prefer Trilogix or idatalink)
So, just connect the thin gauge wire to the wires you cut off and wrap it around the key cylinder several times (test how many wraps you need, varies on different car)
I dont have to worry about space when working on 4runners, maybe if you cut off wires your not using and tape everything in one direction then you could cut down on space required.
Note: You Always Dont Get What You Pay For.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer