the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 mazda tribute remote start add on


Post ReplyPost New Topic
< Prev Topic Next Topic >
msgue6193 
Member - Posts: 12
Member spacespace
Joined: October 21, 2009
Posted: October 21, 2009 at 1:10 PM / IP Logged  
I have a Ultra Start add on 1155TL I need to know the best way to add this to my keyless entry system and use the lock to activate the remote start? Do I take the lock door wire from the drivers side kick and connect it to the Starter Activation input on the ultra start?
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 21, 2009 at 6:39 PM / IP Logged  
Yes, you take the door LOCK wire ( or the door lock motor wire ) and connect it to the activation wire on the Ultra Start. Program it for a triple or dual pulse activation to start the car. You will also need a bypass module for the PATS.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
msgue6193 
Member - Posts: 12
Member spacespace
Joined: October 21, 2009
Posted: October 25, 2009 at 1:12 PM / IP Logged  

well the problem is the door lock wire is  - and the ultra start activation wire only has a + input.  Any help I'm working on it right now. Thanks

mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: October 25, 2009 at 1:31 PM / IP Logged  
Driver Mtr LockPINK/BLACK(REV)DRIVER KICK               
Using this wire will provide a (+) pulse to trigger the remote start.
msgue6193 
Member - Posts: 12
Member spacespace
Joined: October 21, 2009
Posted: October 25, 2009 at 9:03 PM / IP Logged  

I hooked it up to the pink/black in the drivers side kick panel but had no luck I did  tap the wire to 12v three times and the car started so I know it works.  I will have to retest the wire tomm with my 12volt tested b/c i broke the bulb. The only other problem i'm having is finding the parking lights wire which is suppost  to be brown and in the kick panel. Anyone else have a problem finding it?

chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: October 26, 2009 at 6:29 AM / IP Logged  
if its the same as an 05 mariner its going to be in the harness that runs down behind the carpet
If i Can't Install it    I Don't need it   Joe
msgue6193 
Member - Posts: 12
Member spacespace
Joined: October 21, 2009
Posted: October 26, 2009 at 9:37 AM / IP Logged  
chev104275 I assume you mean the parking lights run down under the carpet? I did see a thicker 12 gauge tan wire but I didn't touch it b/c 1. I thought parking lights where thin gauge and 2. it was tan not brown
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: October 26, 2009 at 10:57 AM / IP Logged  
i know with the mariners there are 2 harnesses in the kick one that has clips to the floor and the other runs down behind the carpet   the one you want is down behind the carpet and its a brown not tan i think its a 14-16 ga wire
If i Can't Install it    I Don't need it   Joe
msgue6193 
Member - Posts: 12
Member spacespace
Joined: October 21, 2009
Posted: October 26, 2009 at 11:51 AM / IP Logged  
ok thanks I found it but the main issue is still I need to find a pos input for the remote starter I tried the pink/black trace but I don't get a pos. signal when I hit the lock button on my keyless entry button. Where can I find it that pos input on the lock side?
chev104275 
Gold - Posts: 1,433
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: October 26, 2009 at 12:38 PM / IP Logged  
where are you looking for the wire ?   did you try the harness coming from the door    it should be a larger wire maybe 14 to 16 ga
If i Can't Install it    I Don't need it   Joe
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer