2011 2012 hyundai sonata gls wiring

Hi guys, great forum! I have been searching all over for the wiring diagram that will point me to the wires needed to install a comfort option in my remote starter. The comfrot option has the window rollup feature but I'd like to know where to find the wires under the dash.

readyremote.com bulldogsecurity.com

Didn't see the power window info at either Bulldog Security or ReadyRemote but Audiovox has it.  Here is a link to their WEB site :  http://techservices.audiovox.com/AccessRequest.aspx   Sign-up is free!!!  Soldering is fun!

Awesome! Checking all links now! Thanks guys. Let you know how it turns out. Will definitely post a writeup after i get all my info going.

If you haven't done the remote starter portion yet there is a Pictorial on a basic system, just uploaded today.

https://www.the12volt.com/installbay/forum_posts.asp~TID~132478~PN~1

Soldering is fun!

Thanks kreg357. The audiovox site pointed me to the right place. I was hoping I could get to the wires without pulling the master control power switch open but ah well. No under dash love for me there.....thought I assume they MUST go there at some point...hmm

Only the drivers window has to be connected at the switch.  The other three doors' window wires are in the DPK.   Some more info from another source :

Left Front Window (Up/Down)      brown - gray (w/o safety power window)      power window main switch, white 16 pin plug, pins 9 and 10

Right Front Window (Up/Down)   white - brown               driver kick, door harnessLeft Rear Window (Up/Down)      pink - gray        driver kick, door harnessRight Rear Window (Up/Down)   yellow - green              driver kick, door harness

Soldering is fun!

Except if you're using say a 530t, it's better to go to the window motor wires in each door then you'll have one touch up down at all switches. Otherwise for simply window close use Kregg's last post as your info.

Sweet. Thanks kreg357. I'm actually in my final stages of my remote start install and came online scratching my head to search the interwebs. For some odd reason the darn remote isnt pulsing the power lock wire in my Sonata. Sure, remote stat works PERFECTLY if i pulse the door locks from the door lock switch but from the remote....nada. I've looked at all the great writeups on here regarding the diagram and even checked the audiovox website etc....they all point to the same wire. Oh, did I mention its cold outside? :)

kreg357 wrote: If you haven't done the remote starter portion yet there is a Pictorial on a basic system, just uploaded today. https://www.the12volt.com/installbay/forum_posts.asp~TID~132478~PN~1

Kreg, just realized that you were the writer of the article, silly me. I was gonna do a writeup before I found your own great article...good job! One question, how on earth did you get the remote to work effectively sending the pulses to the lock(-) wire?