2005 mazda tribute remote start add on

Home / the12volt's Install Bay / Car Security and Convenience / 2005 mazda tribute remote start add on (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

msgue6193

Member - Posts: 12

Joined: October 21, 2009

Posted: October 21, 2009 at 1:10 PM / IP Logged

I have a Ultra Start add on 1155TL I need to know the best way to add this to my keyless entry system and use the lock to activate the remote start? Do I take the lock door wire from the drivers side kick and connect it to the Starter Activation input on the ultra start?

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 21, 2009 at 6:39 PM / IP Logged

Yes, you take the door LOCK wire ( or the door lock motor wire ) and connect it to the activation wire on the Ultra Start. Program it for a triple or dual pulse activation to start the car. You will also need a bypass module for the PATS.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

msgue6193

Member - Posts: 12

Joined: October 21, 2009

Posted: October 25, 2009 at 1:12 PM / IP Logged

well the problem is the door lock wire is - and the ultra start activation wire only has a + input. Any help I'm working on it right now. Thanks

mikvot

Gold - Posts: 1,043

Joined: December 19, 2006

Location: Missouri, United States

Posted: October 25, 2009 at 1:31 PM / IP Logged

Driver Mtr Lock

PINK/BLACK

(REV)

DRIVER KICK

Using this wire will provide a (+) pulse to trigger the remote start.

msgue6193

Member - Posts: 12

Joined: October 21, 2009

Posted: October 25, 2009 at 9:03 PM / IP Logged

I hooked it up to the pink/black in the drivers side kick panel but had no luck I did tap the wire to 12v three times and the car started so I know it works. I will have to retest the wire tomm with my 12volt tested b/c i broke the bulb. The only other problem i'm having is finding the parking lights wire which is suppost to be brown and in the kick panel. Anyone else have a problem finding it?

chev104275

Gold - Posts: 1,427

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: October 26, 2009 at 6:29 AM / IP Logged

if its the same as an 05 mariner its going to be in the harness that runs down behind the carpet

If i Can't Install it I Don't need it Joe

msgue6193

Member - Posts: 12

Joined: October 21, 2009

Posted: October 26, 2009 at 9:37 AM / IP Logged

chev104275 I assume you mean the parking lights run down under the carpet? I did see a thicker 12 gauge tan wire but I didn't touch it b/c 1. I thought parking lights where thin gauge and 2. it was tan not brown

chev104275

Gold - Posts: 1,427

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: October 26, 2009 at 10:57 AM / IP Logged

i know with the mariners there are 2 harnesses in the kick one that has clips to the floor and the other runs down behind the carpet the one you want is down behind the carpet and its a brown not tan i think its a 14-16 ga wire

If i Can't Install it I Don't need it Joe

msgue6193

Member - Posts: 12

Joined: October 21, 2009

Posted: October 26, 2009 at 11:51 AM / IP Logged

ok thanks I found it but the main issue is still I need to find a pos input for the remote starter I tried the pink/black trace but I don't get a pos. signal when I hit the lock button on my keyless entry button. Where can I find it that pos input on the lock side?

chev104275

Gold - Posts: 1,427

Joined: November 26, 2007

Location: Massachusetts, United States

Posted: October 26, 2009 at 12:38 PM / IP Logged

where are you looking for the wire ? did you try the harness coming from the door it should be a larger wire maybe 14 to 16 ga

If i Can't Install it I Don't need it Joe

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.