’95 Ford Mustang alarm/remote start

Okay I have done some research on this... I am installing an aftermarket alarm/remote starter in my 95 mustang with factory keyless entry. I know it uses the 3 wire negative pulse for the doors. Do I leave the factory keyless entry module intact and just tap into the wires in the kick panels, or do I remove the factory harness and do something else. Also, why are there 3 ignition wires and which one is hot when the car is on etc? I need to wire 2 different ones I don't know which or what to do. Thanks guys, I really can't afford to take this to a shop lol.

Yes......tap into Factory Lock / Unlock wires

NO.......Do NOT remove Factory RKENot knowing the Brand & Model RS/Alarm U R installing, U may need a couple of SPDT RELAYS for your Ignition hook-up also

Ignition Switch Layout: Ignition #1- TAN/WHT.............Powers Ignition Coil (Primary Ignition)

Ignition #2- GRY/YEL.............Powers Blower Motor(2) * Ignition #3- GRY/YEL.............Powers Trans. Control * Ignition #4- BLK/L GRN...........Powers Heat-A/C Controls * 2 Of These 3 GRY/YEL Wires Are One Circuit

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

I am insatlling a crime stopper CS-2016FM Deluxe 2-WAY Fm Paging Alarm and Remote Start Combo System. I didn't think I needed a relay for remote starting, all I did was splice into the starter wire, WHITE/ pink, and ignition BLACK/ grn. I didn't have to use relays. i THINK. Do i need to touch the grry/yel wires? I didn't.

I am insatlling a crime stopper CS-2016FM Deluxe 2-WAY Fm Paging Alarm and Remote Start Combo System. I didn't think I needed a relay for remote starting, all I did was splice into the starter wire, WHITE/ pink, and ignition BLACK/ grn. I didn't have to use relays. i THINK. Do i need to touch the grry/yel wires? I didn't.

To prevent "Check Engine" Light or ERROR codes, U need to Power up ALL Ignition Wires.  If U want the AC / Heater to work that also needs to be powered up.I believe U only have 2 Ignition ( Ign 1 & 2 ) wires coming from your CS-2016FM .U will need 1 or 2 Relays, depending on which other wires U need powered upMO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Thanks mo12v. I can't get the AC blowing. I guess I need a relay. Right now I am only hooked up to one of the gry / YELLOW wires is that alright?

If I need a relay what type of relay do I get? I have no idea.

So I bought a relay, I have no idea what to do! Isn't a relay like a switch?

Okay, sorry for all the posts but I need to get this working. Everything works except the A/C. I think its because I don't have a valid tach input. Can anyone give suggestions/verify this?