keyless entry, 2000 dodge ram

Home / the12volt's Install Bay / Car Security and Convenience / keyless entry, 2000 dodge ram (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

clockmaker

Member - Posts: 22

Joined: February 03, 2010

Location: Kentucky, United States

Posted: February 03, 2010 at 9:41 PM / IP Logged

Hi,

Would someone be able to help me with the install of the viper 211hv? I have a 2000 Dodge ram 2500 p/u with the Cummins if that makes a difference.

, thanks.

Don

clockmaker

Member - Posts: 22

Joined: February 03, 2010

Location: Kentucky, United States

Posted: February 04, 2010 at 4:00 PM / IP Logged

Hi,

Can someone help me with the viper 21hv for a dodge 2500 ram truck?

Don

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: February 04, 2010 at 4:43 PM / IP Logged

Whatcha need...? Can you provide a link to the INSTALL manual... Do you have a meter...? Do you need wire to wire help...? Wire locations...? Which wires on the unit to use... ?? Can you be a little MORE specific in the help your looking for...!

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

x1le

Copper - Posts: 171

Joined: August 01, 2009

Location: Massachusetts, United States

Posted: February 04, 2010 at 5:53 PM / IP Logged

211 is super easy to hook up. Is there anything specifically that you're confused on?

clockmaker

Member - Posts: 22

Joined: February 03, 2010

Location: Kentucky, United States

Posted: February 04, 2010 at 7:10 PM / IP Logged

The instruction print is very small, it appears it gets righ in to the wiring on the viper 211 but what about the location of the wiring these wires are matched to on my truck? Are all the wires required to be connected to operate the keyless? Don't know what all is to operate when installed correct. Not something I have done before but with help I know I can get it done, thanks for getting back.

Don

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: February 04, 2010 at 7:20 PM / IP Logged

No..you will stagger cut(like a staircase) and then tape the unused wires...All you really need is power,ground,ignition and then door lock wires...Is this JUST a keyless unit...?

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tommy...

Gold - Posts: 1,901

Joined: December 10, 2004

Location: United States

Posted: February 04, 2010 at 7:25 PM / IP Logged

	Battery		RED		(+)		IGNITION SWITCH HARNESS
	Ignition 1		DARK BLUE		(+)		IGNITION SWITCH HARNESS

	Power Unlock		PINK/VIOLET		(REV)		DRIVERS KICK PANEL
	PowerLock		ORANGE / VIOLET		(REV)		10 PIN CONN DR. KICK PANEL REV POL

Oh yeah and parking lights...(if its just keyless...)...Here is the factory disarm wire also...!

Alarm Disarm	LIGHT GREEN/ ORANGE	(-)	DR. KICK GROUND PULSE THROUGH 1500 OHM

Parking Lights	BLACK / YELLOW	(+)	DR.KICK PANEL "WHT PLUG DRIVERS KICK

If it is also an alarm... heres the door trigger...

All Door Trigger		YELLOW		(-)		DR. KICK PANEL "WHT PLUG DRIVERS KICK

All Door Trigger

YELLOW

(-)

DR. KICK PANEL "WHT PLUG DRIVERS KICK

M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 04, 2010 at 7:26 PM / IP Logged

the viper 211hv is just a keyless.

Constant 12v - RED (+) @ ign switch

Ignition - DARK BLUE (+) @ ign switch

Unlock - PINK/VIOLET (REV) @ DKP in 10pin connector

Lock - PINK/VIOLET (REV) @ DKP in 10 pin connector

you will need 2 relays OR use the DEI 451m door lock interface.

Hope this helps.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 04, 2010 at 7:27 PM / IP Logged

damn tommy, one minute too late ahah

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

clockmaker

Member - Posts: 22

Joined: February 03, 2010

Location: Kentucky, United States

Posted: February 04, 2010 at 7:58 PM / IP Logged

It is just keyless, I was told when I bought the thing that nothing else was needed(relays) I hope to wire it for the keyless entry, and have the lights come on? The color wires you mention on the unit are they the same color wires I look for on my truck? Many thanks for the help.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.