phoenix gold ti 800.1 not hittin hard

Home / the12volt's Install Bay / Car Audio / phoenix gold ti 800.1 not hittin hard (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 16, 2007 at 2:32 PM / IP Logged

There's nothing special about Phoenix Gold that makes it different from any other amp... look, if you think the system is not functioning correctly I suggest you go back to the shop where you bught the amp and ask that they check your setup and test the amp if necessary. That'll tell you if it is defective or if you have a setup issue, or maybe that you are simply expecting too much.

Support the12volt.com

kurray

Member - Posts: 10

Joined: August 04, 2006

Location: United States

Posted: November 16, 2007 at 2:36 PM / IP Logged

theres nothing special about a pg titanium, amp? for real? ummmm yeah, okay no help here well it was worth a try.

tcss

Silver - Posts: 1,623

Joined: June 07, 2004

Location: United States

Posted: November 16, 2007 at 2:40 PM / IP Logged

Uhhhh, how are you "running your JLs in the black all the time" when the black on your subs is 800 WRMS and you were putting 300 WRMS to each sub?

There is no such thing as free installation!

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 16, 2007 at 2:58 PM / IP Logged

I smell ebay.

Support the12volt.com

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 16, 2007 at 2:59 PM / IP Logged

kurray wrote:

theres nothing special about a pg titanium, amp? for real?

For real. Mid-line average quality at best.

Support the12volt.com

kurray

Member - Posts: 10

Joined: August 04, 2006

Location: United States

Posted: November 16, 2007 at 3:03 PM / IP Logged

had some W015's 125-150rms was putting 300 RMS to each and they held up okay sure the wires to the terminals broke loose but the speakers was still kickin. was speaking past meaing i have put way over the limit to jls before sure everyone has there own taste im saying i like the JL's and the titaniums have not done me wrong in the past just wondering why this ones being a a#%

W3 are only "500 watts" rms very under rated .

2ohm load on the subs when bridged

kurray

Member - Posts: 10

Joined: August 04, 2006

Location: United States

Posted: November 16, 2007 at 3:06 PM / IP Logged

okay im open to ideas name me a few quality amps u think will do the job.

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: November 16, 2007 at 3:57 PM / IP Logged

How much do you want to spend?

Did you buy your amp from an on-line dealer or from a real store?

Support the12volt.com

kurray

Member - Posts: 10

Joined: August 04, 2006

Location: United States

Posted: November 16, 2007 at 4:03 PM / IP Logged

i got the amp from a friend but he said he hadnt used it in a year. im not trying to spend over $800.00 though

aznboi3644

Gold - Posts: 2,600

This member consistently provides reliable information

Joined: May 01, 2006

Location: United States

Posted: November 16, 2007 at 10:43 PM / IP Logged

I don't see how you said you have the same subs wired for 2 ohm mono on your amp now...but then again on your last amp had it wired for 2 ohm stereo...did you magically change the loads??

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.